1.The overflow valve fixed on the oil tube block has been set correctly by us.Do not try to adjust it, avoid the oil circuit system being destoryed by high pressure.
2.While changing a new cutting die/knife/mold with different height,reset it according to the setting methods.
3.During cutting operation,keep the hands away from the cutter and the cutting area.
4.If the operators need leave the machine for a while,remember to turn off the motor to avoid others make incorrect operation and cause damage to the machine.
5.Avoid overload operation and shorten the usage life of the machine.
6.Must obey the daily maintenance of the machines. Its a guarantee for keeping the machine’s in good performance and prolonging its usage life.
7.If need any help ,please contact Zhicheng for further information.